Europan Type Ambulance

High-Quality ABS Molding System Ambulances

EOS Ambulance responds to your valuable requests with its Europan Type ambulance conversion in accordance with the European ambulance standard EN 1789 norms, produced with a mould system at high standards.

Our right left and ceiling coverings are assembled with a solid mould and rounded edges in the Europan Type ambulance conversion. All moulds are made of ABS material. Our Europan Type ambulances comply with European standards, offer ease of use and high-quality thanks to the ABS mould system.

There is a long Light Bar at the front of the ambulance roof and a short Lightbar at the back of the ceiling.
There are side warning lamps on the upper side of the ambulance, 3 on the right and 3 on the left.
Back-area lighting with projectors
The lightbar and the siren system can be controlled from the driver’s seat.
The ambulance floor is covered with an antibacterial, non-slip and easy-to-clean material.
Under the coverings of the right and left walls of the patient cabinet, there are support plates for fixing the cabinet and medical equipment. There is also sound and heat insulation.
Single-piece in ABS form cover, an oxygen cylinder chamber, oxygen and suction system, and medical gadget cabinet on left side
Single-piece in ABS form covering, a functional doctor seat, a chair stretcher chamber, and the possibility to connect a spine board to the right side
Round-corner moulded system
At the front of the cabin, there is equipment storage with drawers, a command panel cabinet, and a doctor seat.
In the patient cabinet, there is a handle and an I.V Holder along with the cabinet for the personnel.
There are 4 LED type long lamps and 2 LED type spot lamps for patient cabinet lighting.
The ambulance electrical system complies with European standards. There is an additional battery, digital control panel, inverter and rectifier.
There is an internal communication system for communication between the patient cabin and the driver’s area.
Customer-specified reflective inscriptions, stripes, and logos
Extension cable with external 220V electrical input

EUROPAN TYPE AMBULANCE

High-Quality ABS Molding System Ambulances

There is a long Light Bar at the front of the ambulance roof and a short Lightbar at the back of the ceiling.
There are side warning lamps on the upper side of the ambulance, 3 on the right and 3 on the left.
Back-area lighting with projectors
The lightbar and the siren system can be controlled from the driver’s seat.
The ambulance floor is covered with an antibacterial, non-slip and easy-to-clean material.
Under the coverings of the right and left walls of the patient cabinet, there are support plates for fixing the cabinet and medical equipment. There is also sound and heat insulation.
Single-piece in ABS form cover, an oxygen cylinder chamber, oxygen and suction system, and medical gadget cabinet on left side
Single-piece in ABS form covering, a functional doctor seat, a chair stretcher chamber, and the possibility to connect a spine board to the right side
Round-corner moulded system
At the front of the cabin, there is equipment storage with drawers, a command panel cabinet, and a doctor seat.
In the patient cabinet, there is a handle and an I.V Holder along with the cabinet for the personnel.
There are 4 LED type long lamps and 2 LED type spot lamps for patient cabinet lighting.
The ambulance electrical system complies with European standards. There is an additional battery, digital control panel, inverter and rectifier.
There is an internal communication system for communication between the patient cabin and the driver’s area.
Customer-specified reflective inscriptions, stripes, and logos
Extension cable with external 220V electrical input