Funeral Transport Vehicle

Panel Van Type Funeral Transport Vehicle

Our Panel Van type funeral transport vehicle can be manufactured to carry 2, 3 and 4 coffins. The left and right and roof coverings of the vehicle are ABS. The shelves on which the coffins are placed are made of reinforced aluminum. The carriers on the shelves have a cylindrical rotating system for easy loading and removal of the coffin. After the coffins are loaded on the shelf, they are locked with a special lock system, ensuring that they remain stable during the movement of the vehicle.

Our funeral transport vehicle is equipped with a special air conditioning system. The part where the coffins are located can be cooled down to – 2 degrees in a very short time, at +30 degrees outside air temperature. The air conditioning system is independent of the vehicle engine system. Even when the vehicle is not running, the air conditioning system continues to work to keep the indoor temperature at the desired level.

Special insulation has been applied to keep the internal temperature of the transport compartment at the desired level in all weather conditions of our funeral transport vehicle. The interior air conditioning system, which reaches – 2 degrees cold, can maintain its interior temperature for 25 to 30 minutes without operating.

We can manufacture the designs of our funeral transport vehicles in different ways according to the wishes of our customers.

The features of our Panel Van Type Funeral Transport Vehicle are as follows:

It has a high level of isolation. It can withstand temperatures ranging from -45 to +55 degrees Celsius.
Options for interior coatings. Aluminium, chromium, or ABS are some of the materials that can be used.
The air conditioning system is independent of the vehicle engine system. It has the ability to cool to -2 degrees celsius.
Transport system made of stainless steel with a roller and coffin locking device.
There is a companion area for three people.
The announcing system, light bar, and speech system
Interior lighting and a projector system on the outside. (All of these characteristics can be applied to any type of panelvan vehicle)

Our panel van type Funeral Transport Vehicle mentioned above is available in our ceremony type models.
The features of our ceremony type funeral transport vehicle are as follows:

It is applied to two different chassis types as a double cabin and a single cabin.
If desired, it is cooled in four funerals as completely closed in the ceremony model.
Double cabin vehicles are used as a companion. In the single cabin model, the companion section is used applied to the equipment.
The vehicles will have green announcement and headlights with a sound system.
A projector is mounted on the rear exterior of the vehicle as a night light.
The coffin apparatus is a stainless roller system.
Coffin fixing devices and additionally belt fastening are used.
The equipment design is designed according to the original aryo dynamic lines and dimensions of the vehicle. The equipment sheet is made of galvanized stainless steel, which is of the same quality as the sheet used in the vehicle.